How much does it cost per month to operate the Sunlighten mPulse? The mPulse operates at 2,400 watts (roughly the same as a blow dryer) and costs approximately 14 cents per hour (here in Georgia). Depending on how much electricity costs where you live, it might be a bit more or a bit less.
A “dedicated” 220-240 volt, 30-60 amp breaker and GFCI must be used for the sauna. The circuit must be “dedicated”, meaning it should only supply power to the sauna and nothing else. The voltage of the circuit must be between 220-240 volts and the breaker, which is a safety device that interrupts the electrical current if it becomes too 5 to 20 minutes per session and repeat the use of the sauna from 2 to 3x per week, or as often as 7x per week. Protocol #1 — Sauna for Cardiovascular Health IN ORDER TO IMPLEMENT THIS PROPERLYIf you use your sauna for 20 minutes versus an hour, there will be a difference there as well. Usually, your sauna seller will be able to help you estimate how much power your sauna will use per hour. As a rough calculation, a 1000W sauna will use around 1 kWh (1 kilowatt per hour) of electricity.
WjBQl.